Belshaw Mounting Kits for Type N
Belshaw Mounting Kits for Type N
Description
MOUNTING KITS FOR TYPE N
The Type N is designed to work with Belshaw's 616B / Type N Combo system.
For other situations, Type N has 3 mounting systems - either to your existing 616B fryer, or to a wall.
The Short Arm Column Mount attaches the depositor simply and easily to a 616B fryer, to form a 616B / Type N Combo system.
The Long Arm Column Mount attaches the depositor to any suitable fryer. You may need a stiffening plate (Bracket Plate kit P-1000) to hold the mounting kit. Consult with a Belshaw Support Technician before purchase.
The Wall Mount attaches your depositor to the wall behind your fryer. The installation must be very dependable and secure. If you move the fryer, you must re-install the Wall Mount. It is sometimes a good solution if a Type N depositor is combined with a different fryer.
Specifications
| Manufacturer | Belshaw |
| Condition | New |
| Stock Number | 0 |
| Part # n-1033 | Type N Short-Arm Column Mounting Kit for 616B Fryer (as used by "Cut-N-Fry" system) |
| # n-1033 full extension (from the mounting point to the donut deposit, center-to-center) | 22 inches (56 cm) |
| Part # n-1034 | Type N Long-Arm Column Mounting Kit for other fryers |
| # n-1034 full extension (from the mounting point to the donut deposit, center-to-center) | 32 inches (81 cm) |
| Part # n-1036 | Wall Mounting Kit for Type N |
| # n-1036 full extension (from the mounting point to the donut deposit, center-to-center) | 32 inches (81 cm) |
| Part # 0400 | Precision Height Adjuster for Type B, F or N (Column Mounts only) |